Ali Editor for OpenBox S9 HD PVR
Página 1 de 1.
Ali Editor for OpenBox S9 HD PVR
por Ospite Lun Ene 23, 2012 12:25 am
Ali Editor for OpenBox S9 HD PVR
This is the Ali Channel Editor for the OpenBox S9. If you have used the Ali Editor for Traxis you will find it functions similar. With this Ali implementation there are two portions to the file, Default Data and User Data. If you save the edited file as default data when you default the receiver all channels are erased and your sat/tp list becomes the default. To write your channel list, export a copy of the file as userdata. This file will add your channel list and your satellite list, which returns to the default one upon doing the factory reset.
Some further instruction:
Copying the file to USB
Plug in USB drive.
Go to MENU > TOOLS > DUMP BY USB
Arrow to MISC Files then arrow down to SELECT & DUMP and press OK
Press green button to add TP_PROG.dbs
Press yellow button to copy the file to your USB drive.
Loading/saving with Ali Editor
IMPORTANT: YOU MUST CHANGE THE .dbs EXTENSION TO .abs IN ORDER FOR THE ALi EDITOR TO PROCESS THE FILE. AFTER WORKING WITH THE FILE YOU MUST NAME IT BACK TO .dbs TO PROPERLY LOAD IT TO THE OPENBOX. FAILURE TO DO SO WILL RESULT IN FLASH FAILURE. USE AT YOUR OWN RISK!!!
In Ali Editor-
FILE > OPEN
A box appears. At the bottom select OPEN BIN FILE(*.abs). Then find the file you saved from the OpenBox.
When loading it will ask you if you want to work with default database or user database. Default database is just the satellite list & TP's from FridgeFTA/OpenBoxS9.us, no channels. User database contains the satellite list & TP's along with the channels, satellites and TP's that you have added. Select user database to work with your channels.
After working with the data do not save. Go to FILE > EXPORT. Select type as OPEN BIN FILE(*.abs) and save to your flash drive or other location. DON'T FORGET TO CHANGE THE EXTENSION TO .dbs BEFORE FLASHING BACK TO YOUR OPENBOX.
It will prompt you again if you want to export user database or default database. Select user database in most cases. Default Database will write your file perminately into memory, when you default the OpenBox all your data comes back. In many cases not a good idea.
Flashing the file to the OpenBox is the same as reading it from it, except select UPGRADE BY USB instead of DUMP BY USB.
After flashing your channel data, turn the OpenBox off for 10 seconds using the remote control. When you turn it back on your data file has replaced the data that was in memory. Failure to turn it off then on will result in a messed up channel list until you do so.
*** USE AT YOUR OWN RISK ***
This is the Ali Channel Editor for the OpenBox S9. If you have used the Ali Editor for Traxis you will find it functions similar. With this Ali implementation there are two portions to the file, Default Data and User Data. If you save the edited file as default data when you default the receiver all channels are erased and your sat/tp list becomes the default. To write your channel list, export a copy of the file as userdata. This file will add your channel list and your satellite list, which returns to the default one upon doing the factory reset.
Some further instruction:
Copying the file to USB
Plug in USB drive.
Go to MENU > TOOLS > DUMP BY USB
Arrow to MISC Files then arrow down to SELECT & DUMP and press OK
Press green button to add TP_PROG.dbs
Press yellow button to copy the file to your USB drive.
Loading/saving with Ali Editor
IMPORTANT: YOU MUST CHANGE THE .dbs EXTENSION TO .abs IN ORDER FOR THE ALi EDITOR TO PROCESS THE FILE. AFTER WORKING WITH THE FILE YOU MUST NAME IT BACK TO .dbs TO PROPERLY LOAD IT TO THE OPENBOX. FAILURE TO DO SO WILL RESULT IN FLASH FAILURE. USE AT YOUR OWN RISK!!!
In Ali Editor-
FILE > OPEN
A box appears. At the bottom select OPEN BIN FILE(*.abs). Then find the file you saved from the OpenBox.
When loading it will ask you if you want to work with default database or user database. Default database is just the satellite list & TP's from FridgeFTA/OpenBoxS9.us, no channels. User database contains the satellite list & TP's along with the channels, satellites and TP's that you have added. Select user database to work with your channels.
After working with the data do not save. Go to FILE > EXPORT. Select type as OPEN BIN FILE(*.abs) and save to your flash drive or other location. DON'T FORGET TO CHANGE THE EXTENSION TO .dbs BEFORE FLASHING BACK TO YOUR OPENBOX.
It will prompt you again if you want to export user database or default database. Select user database in most cases. Default Database will write your file perminately into memory, when you default the OpenBox all your data comes back. In many cases not a good idea.
Flashing the file to the OpenBox is the same as reading it from it, except select UPGRADE BY USB instead of DUMP BY USB.
After flashing your channel data, turn the OpenBox off for 10 seconds using the remote control. When you turn it back on your data file has replaced the data that was in memory. Failure to turn it off then on will result in a messed up channel list until you do so.
*** USE AT YOUR OWN RISK ***
Ospite- Invitado
Temas similares» Openbox S9 PVR Channel Editor
» Channel editor Openbox S9
» Openbox S9 Channel Editor (opens .dbs files)
» OpenBox S9 - Como meter flores en OpenBox S9 con vPlug Server
» OpenBox S9 - Cambiar el fondo de nuestro OpenBox S9 HD
» Channel editor Openbox S9
» Openbox S9 Channel Editor (opens .dbs files)
» OpenBox S9 - Como meter flores en OpenBox S9 con vPlug Server
» OpenBox S9 - Cambiar el fondo de nuestro OpenBox S9 HD
Página 1 de 1.
Permisos de este foro:
No puedes responder a temas en este foro.
» saludos raza
» saludos amigos, me interesa ver comentarios openboxs10
» Firmware Openbox S10 V2 Released !! Red Passion (03/02/2012)
» presentacion
» pansat 2700
» Presentacion
» Saludos buenas!
» presentacion
» Firmware para actualizar el i-box (Dongle de Openbox para Amazonas)
» Reglas del Foro
» Buenas me presento.
» Presentandome
» firmware y lista de canales para azul openbox s10
» Hola como estan
» saludos y buenas noches
» gracias por la oprtunidad
» Guia completa para usar nuevamente la pansat
» Saludos a todos
» Presentacion en el foro
» Saludos a todos
» Guia completa y en español para la DM500s
» Saludos desde Venezuela
» Guia ICS para el Pansat 3500
» 3500 I.K.S bin
» Mayorias de archivos utilizados para la nfusion
» saludos me presento
» Linuxsat-Support.ComOpenboxToolboxV1
» DogSettings
» saludos a todos
» Latest Cardservproxy Trunk Versions
» Cccam 2.3.0 fpr GP/GP2/and GP3
» Lastest Version of Oscam
» Covertir cw-600 premium en cw-650 con exito
» Hola a todos
» tutorial para descongelar la ilink 9500hd
» loader para el ilink 9500hd
» Is9500_factory
» files channel and bin pr para ilink 9000 plus
» pasos de jtag nfusion
» Dreamlink_SD_200_20120208
» Solution for ECM TIME nand in OE1.6 Images
» Skin Global Blue für VTI 4.1
» Valentine HD for VTI 4.1
» 10.02.2012
» Tool OSCam Collection by Gianni8127
» Saludos a todos
» Dreamlink_SD_Factory_100_20120112
» Download DM7020HD
» Openbox S9 Softcam
» Pansat 2700-I.K.S
» Firmware OPENBOX S9HD CLONE 05/01/2012 Beta !!!!
» LT6½ OE1.6 SPX for DM7025 released
» OoZooN-CVS-DM7025-Images
» Merlin2-Excalibur Images DM7025
» PB-Powerboard Enigma II VX DM7025
» The Gemini Projekt 4.70 DM7025
» PLi-Jade dm7025
» Oscam 5953+CCcam213 for Black hole images
» Update 07.02.2012
» Hypercam 2.18 for AAF Image
» AzBox Me RTi Core v1.7.0
» AzBox MiniMe RTi Core v1.7.0 - 08.02
» Gemini Project 4.70 DM600PVR For Clone
» PB-Enigma-V4
» Nabilosat Enigma1 DarkStar II - DM600
» Latest Gemini Project Version
» Latest EDG-NEMESIS Version
» SifTeam Images 7000
» Power of Dream 4.2-DM7000-Images
» Merlin - Wizard of Dream DM 7000
» Evolution 2.4 Dreambox edition
» Punt@l-DM7000-Images
» AZBox_NewGen+_V2.30_2012.02.07
» AZtrino_Me_1.6
» Coolsat 5000 Jtag Information.
» CoolSat w/Dongle
» manual para usar la coolsat actualmente.
» CS 5K Slingbox Remote Codes
» Cs channel list fix caid 110 118/119 using 118/119 dual cir
» archivos utilizados usualmente por la coolsat 4k 5k y 6k
» Fixed CS chnl list
» Update 07.02.2012
» update 07/02/2012
» Neon Blue HD Skin for VU+DUO
» Update 07.02.2012
» Update 07.02.2012
» Lastest Version of Oscam
» Update 07.02.2012
» New update from 07.02.2012